LEM-3

LEM 3

Concentrated pH-neutral detergent specifically formulated for the routine cleaning of floors and surfaces. Effectively removes everyday dirt and grime without damaging the material or leaving residues, streaks, or surface films. The cleaned surface is left with a long-lasting, pleasant fresh fragrance. Thanks to its controlled low-foam formulation, rinsing is generally not required, making the product suitable for both manual cleaning and use in automatic floor scrubbers. Safe for use on all treated, sealed, waxed, and polished surfaces. Ideal for the regular maintenance of natural stone, porcelain tiles, terracotta, ceramics, and concrete. Regular use helps maintain the original appearance of treated surfaces while preserving protective treatments and floor finishes.

Method of use :
ALWAYS TEST PRODUCT FIRST following the below indications before proceeding with complete product application. Cover and protect all surrounding areas before proceeding with application.

Daily cleaning: Dilute the product 1:100 with water (10 ml of product per litre of water). Apply using a traditional flat headed mop or microfibre cloth. Allow the surface to dry naturally.

Periodic cleaning: For the removal of heavier dirt build-up and traffic residues, dilute the product 1:30 with water (approximately 30 ml of product per litre of water). Apply using a flat headed mop or microfibre cloth. Allow the surface to dry naturally.
Walk behind floor scrubber: dilute products using indicated dilution rates. Proceed to clean surface fitted with soft bristle brushes or white nylon pad.
Coverage:
One litre of non-diluted product can be indicated for routine cleaning; approx. 1000 m² of surface*
(*) using an indicative dilution rate of 1:100. Indicative coverage depending on the number of coats, texture and porosity of
the surface.
Packaging:
Available in the following sizes: 1 lt., 5 lt., 25 lt.