AQ Proof

AQ PROOF

Natural effect water based water and oil sealer, ready to use, suitable for protection treatment of limestone, sandstone, terracotta, cement, not polished stones and agglomerate. AQ PROOF protects against watery or oily/greasy dirt, reduces the tendency of material to become dirty and in most of cases, does not changes the original color of treated stone.

Method of use :
Surface must be clean and dry; stains, mildew , crusting must be scraped off otherwise they will be harder to remove after protection. Application can be done by brush, by roller or by spray gun. It is suggested, when possible, to apply the product by brush because it allows the product to penetrate well into the stone. Application of AQ PROOF by brush, making pressure, will facilitate penetration into frames and cavities. Let the product dry naturally and the stone will be protected. In case of excess of product, the same can be removed using a dry cloth or paper towel soaked with AQ PROOF. During the application and subsequent drying, the temperature of the substrate should be between 10 and 30°C. In case of application on floor with underfloor heating system turn off heating and allow the stone to cool completely.
Coverage:
For the protection of polished granite, one liter of product can treat 20 to 30 sqm (210/350 sq.ft.), depending on the absorption and degree of finish of the material. For limestone, sandstone and unpolished marble from 10 to 15 sqm (120/200 sq.ft.)