Water based, protective water repellent for the protection of natural stone and masonry surfaces.


Innovative, water repellent, bead eect gives long lasting protection to all external masonry surfaces. It does not change the natural aspect of material and penetrates deeply. The “3-size” nano-molecules are small enough to penetrate even the smallest pores of most substrates, keeping external water from entering the substrate. Treated surfaces remain breathable. The product is UV resistant and non-yellowing. The protected surfaces are maintained with ease due to its “easy-clean” effect. Its neutral pH formulation allows the product to be used also around metals. Due to its water hydrophobic property, it prevents the growth of mildew and mould. It protects against weathering, efforescence and freeze-thaw damage.

  • Close up: NATURAL EFFECT
  • Method of use :

    The surface to be treated must be clean and dry. Remove all dirt, mould and grime from the surface before application. The product is ready for use. Apply to the surface evenly with a large bristled brush, roller or low-pressure spraygun until saturation. Leave it on for 45 minutes then remove the excess, if any, using a clean cloth.

  • Coverage:

    Polished marble: Approximately 20-30 m2
    Terracotta, brick and masonry surfaces: Approx. 8-15 m2

  • Packaging:

    1 LT Cod. P121WBK10L, 5 LT Cod. P121WBK50L

Information request
 *  I consent to the processing of data in accordance with EU Regulation 2016/679. Complete information