Limesealer

LIMESEALER

Protective, solvent based water and oil-repellent treatment with consolidating and anti-moisture properties. Thanks to its fluoro-siloxane formulation, the product is specifically designed for the protection of soft and delicate natural stones, such as limestones and sandstones (e.g. Pietra di Vicenza, Pietra di Lecce, Pietra di Modica). The product penetrates deeply into the pores, providing protection against water- and oil-based substances, atmospheric humidity, and acid rain. Treatment reduces the formation of salts and efflorescence, limits moisture absorption, and reduces the development of mould, while allowing the material to breathe. Treated surfaces remain breathable, UV-resistant, without modifying their natural colour and appearance.

Method of use :
ALWAYS TEST PRODUCT FIRST following below indications, before proceeding with complete product application. Ensure that surfaces to be treated are completely dry and clean, free of dirt, dust, grime and surface incrustations. Cover and protect all surrounding areas before proceeding with application.
Manual: Product is ready for use. Apply an abundant coat of product uniformly using a soft bristled brush to material. Allow surface to absorb product for 5 minutes before applying a second coat of product (where needed). Remove all eventual excess product, pooling or residues within 15 minutes using a clean cotton cloth, dry roller or microfiber, until all excess product is absorbed.
Airless: (spray): Using a low pressured hand-held spray or airless, apply product maintaining a distance from surface of 20-25 cm. Allow product to be absorbed into surface before applying a second coat as indicated above. On vertical surfaces, apply two coats of product wet on wet. Start at the bottom and work the way up. Dry up and remove eventual product drips. Place tarp or plastic protective sheeting below the treated area to catch eventual drips. Allow product to penetrate completely in all cracks, holes and open areas.
Notes: During application, product should be applied to materials with temperature between 10° and 30°C. Before application to floors with underfloor heating, turn off all heating and allow floor to cool completely before product application. Maintain product in its original container/packaging. Always test product first.
Coverage:
Calcareous stones, sandstones, Marble/cement: 10/15m²*
(*) depending on the number of coats, texture and porosity of the surface.
Packaging:
Available in the following sizes: 1 lt., 5 lt., 25 lt., 200 lt.