Idea Stonager

IDEA STONAGER

Solvent-based, penetrating colour enhancer. Specifically recommended for porous, non-polished surfaces; sandblasted, bush hammered, textured and flamed. Application protects against the absorption of water, humidity-related stains, oils, greases and fats, while supplying an enhanced uniform deeper colour to the material. The treatment reduces the formation of mould and mildew, while improving resistance to freeze–thaw cycles and reducing the development of efflorescence.

Method of use :
ALWAYS TEST PRODUCT FIRST following below indications, before proceeding with complete product application. Ensure that surfaces to be treated are completely dry and clean, free of dirt, dust, grime and surface incrustations. Cover and protect all surrounding areas before proceeding with application.
Manual: Product is ready for use. Apply a coat of product uniformly using a soft bristled brush, microfiber cloth, wax applicator or a roller to material. Allow surface to absorb product completely. After 10-15 minutes, remove all eventual excess product, pooling or residues using a clean cotton cloth or microfiber, until all excess product is absorbed.
Note: remove all excess residues within 30-60 minutes following application. On highly porous materials, apply a second coat of product within 1-2 hours from the first.
Notes: During application, product should be applied to materials with temperature between 10° and 30°C. Before application to floors with underfloor heating, turn off all heating and allow floor to cool completely before product application. Maintain product in its original container/packaging. Always test product first.
Coverage:
Textured natural stone surfaces: 8/12 m² *
(*) depending on the number of coats, texture and porosity of the surface.
Packaging:
Available in the following sizes: 250 ml, 1 lt., 5 lt., 25 lt.