A top quality concentrated wax, dissolved in an non-inflammable solvent. This product, born in 1937, is a paste with exceptional polishing and protective power, due to the extremely high quality of raw materials used in its preparation. SPECIAL PREPARATION penetrates into the material (marble, granite or stone agglomerates) and if it is then rubbed with fine steel wool, a felt pad, or a dry woollen or cotton cloth, a uniform brilliant and long-lasting mirror-finish will be achieved.Its special composition fills and seals porosities in the material and covers small scratches. SPECIAL PREPARATION is available in the following colours: neutral, red, green, yellow, brown and black.

Liquid wax specially formulated to intensify and to enhance marble and granite colours giving them an attractive “wet look”. Since the product contains no resins, it will not leave an unattractive film and will not become yellow. It dries quickly and polishes easily. LIQUID PREPARATION is exceptionally useful for corners, edges and areas where mechanical polishing is difficult.

A polishing liquid containing a special modified silicone. Dries very quickly. This product has been specially formulated for the use with automatic line waxing machines to protect and polish marble, granite, agglomerate slabs and tiles and also terrazzo and ceramic tiles. Its special formulation permits also the use by hand to polish and protect internal and external walls, skirtings, risers and monuments.

Liquid product studied to polish and boost color of every stone material; it protects and polishes marbles, granites and stones edges.Application of SUPERLUX E3 makes unnecessary the following polishing of treated material.SUPERLUX E3 is particularly suitable to be used on corners and edges, it strongly enhances color and shine to material smmothed up to 800 grit.It is available in spray form for rapid and longlasting treatment, replacing the paint-brush and cloths and facilitates the polishing of engraving-work or difficult corners that otherwise cannot be treated. SUPERLUX E3 is available in liquid and spray version.

SUPER CRYSTAL is a polishing powder for final polishing and re-polishing of marble, agglomerate, marble-cement, terrazzo and limestone floors. The product works on calcareous materials only. SUPER CRYSTAL hardens the surface and protects it from scratches and scrapes, giving a long lasting shine and restoring the beauty of the material. It is the ideal product for the restoration of surfaces worn by time or by foot traffic. SUPER CRYSTAL also allows to harden the surface subject to heavy traffic.To be used with water and a buffing pad to get excellent results.

It is now easy to renew a long-lasting sheen and to harden the surfaces of marble and stone agglomerates without using wax or resin. Just use VETRO-GLASS crystallizer. A thermo-chemical reaction known as “crystallisation” is obtained by the use of a single-disc polishing-machine which lets the calcium carbonate (a natural marble component) to be dissolved by mild acids and mixed with vitrifying agents produces a shiny and extremely hard surface that looks like glass. Porosities are completely sealed, and the floor becomes much more resistant to traffic.

Silicon based polisher LUCIDO is easy and fast to apply, suitable for the fine polished surfaces and it enhances the stone colour and shining. Its best features are the easy usage and immediate effect in fact you just have to apply LUCIDO on the stone, wait 5- 10 minutes then rub with a cloth and you will get the desired result.

"Eureka" is the new gel for polishing surfaces in marble and limestone materials in a simple and fast way, using a buffing machine or a grinder. It can be used on polished materials above grit 400 or in alternative to crystalliyzers or polishing powders. EUREKA a polishing gel specifically formulated to polish new marbles, or to re-polish floors that lost their brightness and color from wear. "Eureka" does not contain lead.

EUREKA is a new polishing gel, special for polish granites and gres quickly and easily, just using a single disc machine or a grinding-honing machine. It is possible to use it on smoothed materials, starting from grain 220 and above, or in alternative to tin oxide. It is a gel product, specifically designed to polish new granites and gres surfaces, or to restore polish floors that lost shine and color by high traffic.EUREKA does not contain lead.

EUREKA is a new polishing gel, special for polish gres quickly and easily, just using a single disc machine or a grinding-honing machine. It is possible to use it on smoothed materials, starting from grain 220 and above, or in alternative to tin oxide. It is a gel product, specifically designed to polish new gres surfaces, or to restore polish floors that lost shine and color by high traffic.

EUREKA is a new polishing gel, special for polish quartz resin quickly and easily, just using a single disc machine. EUREKA QUARTZ specifically is the ideal product for polishing engineered stones quartz based (I.E.: SILESTONE®, OKITE®, SM Quartz®, LIVING®, GULFSTONE® QUARTZ etc ... (*). Material can be treated to restore or to increase the original gloss, to enhance the color and to correct imperfections caused by natural wear and tear of materials.(* ) material names and trademarks are the property of their respective owners, the citation is for examples purposes only)

Clear protective agent studied to protect stones against water, oil, grease and humidity. IDEA HP penetrates deep into the stone, blocks the efflorescence and let the stone breaths and does not change the natural colour of the stone; does not create unsightly plastic film.Laboratory test shows IDEA HP resists well to UV rays and the colour does not change even after prolonged time. IDEA HP is perfectly clear and leave unaltered the original stone colour. Most suitable for façade, table, kitchen, vanity tops etc. It prevents mildew formation.

IDEA XC is a new impregnating sealer to protect stones against water, oil, grease and humidity giving an attractive wet-look effect; optimum also for polished materials. When applied, IDEA XC penetrates into the stone without forming unsightly plastic films.IDEA XC will make the stone supports water and oil repellent by penetrating deeply into the stone, protecting it from water and oily substances but allowing the stone to breath while the humidity can evaporate, therefore blocking efflorescence. The constant research for latest generation raw materials has permitted us to produce new water and oil repellent, which can enhance the colour of stone and at the same time, it can protect the same from stain caused by oil and other penetrating substances

Solvent based, nano-tech penetrating “extra dark” colour enhancer and anti-stain protective. Highly recommended for absorbent textured, leather finish, rough black and dark coloured materials to supply an intense dark effect while covering up potential surface defects and stone imperfections. Protects materials from water and humidity-based stains, oils, greases and fats from penetrating surface without leaving a surface film. Prevents the formation of mold, mildew and protects stone against freeze-thaw and efflorescence. UV Resistant. PFAS free - Formulated without added Pfas

Exceptional antistain product based on nanotechnology formulation, it protects marble and granite stones from a wide range of stains. IDEA GOLD has prolonged efficacy.Transparent protective used for maximum protection of all stone surfaces against water penetration, oil, fats and moisture. IDEA GOLD works great even on shiny materials, allows the stone to breathe, blocks efflorescence, penetrates deep, does not alter the natural color of treated surface and does not create any film.

Penetrating “black pigmented” colour enhancer and anti-stain protective. Specific for treating absorbent textured black and dark coloured granite slabs to cover up potential surface defects, stone imperfections and to uniform colour. Protects materials from water and humidity-based stains, oils, greases and fats from penetrating material without leaving a surface film. Prevents the formation of mold, mildew and protects stone against freeze-thaw and efflorescence

Silane/Siloxane based, protective water repellent and consolidant. Indicated for the protection of all vertical natural stone surfaces and masonry materials against water penetration, rain, moisture, mould, acid rains, atmospheric conditions and smog buildups, providing long lasting protection. Due to its consolidant characteristics, product can be applied to soft and delicate stones to avoid potential chalking, crumbing and surface flaking as a surface hardener. Completely transparent, product does not change or alter the natural appearance of the material. Reduces the formation of mold, mildew, salts and efflorescence. PFAS free - Formulated without added Pfas.

Water and oil repellent for protection of horizontal and vertical stone facades made in marble, granite, terracotta, natural stones, ceramic porcelain stoneware: BLOCK D70 ECO PLUS prevents penetration of water, humidity, oil, alimentary grease. Its chemical composition allows the treated material to breathe and allows humidity to exit from the stone but prevent the same from entering. BLOCK D70 ECO PLUS prevents mildew formation.

LIMESEALER is a transparent water and oil impregnator that strengthen the stone and prevents salts and efflorescence from surfacing. It contains silossane and fluorinated resins specifically studies for weak stones that tend to crumble and exfoliate like limestone, sandstone (for example Vicenza Stone, Lecce Stone, Modica Stone etc).LIMESEALER gives an optimum protection to the treated stone against humidity, acid rain and it prevents the formation of mildew but at the same time let the stone “breaths”. LIMESELAER will not change the colour to the treated stone.

Natural effect water based water and oil sealer, ready to use, suitable for protection treatment of limestone, sandstone, terracotta, cement, not polished stones and agglomerate. AQ PROOF protects against watery or oily/greasy dirt, reduces the tendency of material to become dirty and in most of cases, does not changes the original color of treated stone.

This product is used on marble, granite and stone as water repellent and it gives a pleasant “antique look” to the material. Besides giving a remarkable “wet look” to the stone, it protects it against humidity, grease and oil stains. ANTIK gives a nice satin look to the stone. Very good on sand-blasted, acid treated, bush-hammered or flamed finished stone and it can also be used on brushed, honed and polished surfaces to enhance the stone colour. Laboratory tests show ANTIK has high resistance to UV rays and prevents moulds formation.

Professional one component neutral curing silicone sealant. Odorless and not corrosive. Excellent weathering resistance. Its chemical composition is indicated for expansion joints (movement according factor 25% (LM25) as per EU standard), sealing of façades, sanitary ware, washbasin, mirrors, glass in contact with natural stones. The product has a good bond and doesn’t need a primer. The formulation does not leave stains on natural stone or porous substrates. It’s formulation have been improved with anti mould additive. For indoor and outdoor application.

Certifications: EN 15651 -1 : F-EXIT-INT-CC, EN 15651 -2: G-CC ,EN 156561 -3: S EN 15651 -4: PW-EXT-INT-CC

Silicone based, colour enhancer and protective to increase colour and aspect, increasing surface resistance to water and oils on various textured materials; marbles, granites, natural stone and agglomerates.Treated material maintain a uniform intense “wet look” effect. Breathable and deep penetrating solution, product does not leave surface residues, films or plastic effects.

Two pack mastic for marble and stone, based of unsatured polyester resins. It hardens quickly after adding its hardener. It has good adhesive power , it is available in different colors; liquid and solid version. The product is specifically formulated for marble repair, filling, gluing and joint adhesions. The product can be used for filling gaps between metallic accessories and stones when mechanical fixing is used. After harderning, it can be worked as the stone. It can be coloured by using Bellinzoni colour paste tubes and colour oxide powders. It is resistant to most of the chemicals such as oils, fats, detergents, solvents, etc

Two component, super transparent mastic for the gluing and filling of marble and stone. Its good adhesive power and unbeatable transparency make ASTRA 24K a needful product for marble and light colored stones, and everytime transparency is a particular necessity. Typical example is the filling of travertino, whenever the characteristic holes need to be seen. ASTRA 24K is available in liquid (flowing) and solid (knife grade) version.

Two component mastic most useful to glue and fill THASSOS and other cristalline marble such as MAKRANA, and BIANCO CARRARA. The MASTIC THASSOS color is, at all effect, similar to the marble from Greece. A very important point is the usage af the special catalyst that reacting with the resin will look and become exactly like as the marble. The mastic moreover has optimum resistance to U.V. rays.

Two-component, epoxy/polyester-based hybrid adhesive formulated for exceptional adhesion and mechanical strength. It is highly recommended for gluing, bonding, and filling various materials, including marble, granite, natural stone, ceramics, and engineered stones. Thanks to its unique formulation, this product combines the mechanical and chemical strength of epoxy resin with the fast-drying properties of polyester resin. The result is an adhesive that offers the workability of a polyester resin while delivering the superior mechanical resistance of an epoxy. It is highly resistant to chemicals, aggressive cleaners, alkaline substances, and solvents, ensuring durability in demanding environments.

Available colours

B01 WHITE / B02 LIGHT STRAW /  B03 TRANSPARENT

Two pack epoxy mastic, suitable to glue, joint, fill and reinforce various types of granite marble and stones. Product with a higher adhesive power, its performance makes it useful to fill or rectify also big imperfections on works that otherwise would be considered waste. Weather-proof and with a very high resistance to solvent, alkali and acid, is the best filler-paste for marbles and granites. Types available: liquid (transparent) and tixo (transparent, straw-yellow and white).

.

Two component epoxy resin with high transparency and very low yellowing for gluing, jointing and filling of various types of granites, marbles and stones, also very hard or crystalline ones, where the adhesion of polyester-based adhesives are sometimes insufficient.EPOX Premium is super transparent, has very high bonding strength and adheres well also to slightly wet stones, can fill even large flaws and correct objects of value which otherwise would be considered waste.

STONEPOXY is a two-component epoxy adhesive suitable for gluing and laminating tiles, floors and coverings in marble, granite, quartz and ceramic. Highly recommended for use in high stress applications such as bonding large format porcelain stoneware panels with zero vertical slip to walls and for gluing material to different substrates where a high resistance and strength is required. Due to its creamy consistency, product can also be used for filling cracks or uneven surfaces, ensuring an even surface while restoring the integrity and appearance of the substrate. STONEPOXY is an excellent adhesive also for anchoring threaded rod, rebar and metal plates keeping them firmly in place. Indicated for bonding mixed materials such as: metal-stone, concrete-stone, concrete-metal. Can be used on damp surfaces. Does not drip. No shrinkage, allowing for fast repairs also in extreme conditions. Mixing ratio 1:1. Indicated for indoor and outdoor use.

Revolutionary impregnator with two components, specially suited to the sealing and filling of microcracks capillaries present in expensive marble and granite, which if not repaired perfectly and invisibly would be unusable and wasted thus causing big loss for the operator.

A2 is a silicone-based spray polish for the daily care of bronze, steel and polished metals in general. It does not contain solvents and does not damage the varnish or patina of modern bronzes. A2 SPRAY leaves a very fine layer of pure silicone over the material, waterproofing, giving a sheen and reviving the colour. It does not contain CFC and therefore does not endanger the ozone layer.

A warm, dry and long-lasting polish can be achieved with RR/1 which will last through several cleaning operations. It is a highly concentrated product so it can be heavily diluted in water, making it very economical to use. RR/1 is also pleasantly perfumed. It provides long-lasting resistance to damage from foot traffic and does not leave patches. It does not contain any of the resins that cause unsightly films.

Liquid wax based on natural and synthetic waxes, its special formula gives reduced slipperiness compared to traditional waxes. Suitable for all kind of marble, granite, terrazzo and ceramic floors. It gives a brilliant-warm sheen.

Product for the easy and quick maintenance of floor in natural and agglomerated stones; it reduces slipperiness compared to normal wash&polish on market. Used for the maintenance of surfaces treated with Antislip Polisher AS-11.

Concentrated acidic based detergent specific for the deep cleaning and removal of post installation dirt and grime, inorganic residues, limescale, salts and efflorescence, grout haze and cement build ups from natural stone, tiles, granite and from all acid resistant material. Rapid action cleans effectively all outdoor surfaces and pavers removing rust residues and build ups. Highly recommended for the removal of “engobe” or back print from ceramic and porcelain tiles.

Cleaner with high detergent power for removal of dirt: grease, smog, oily dirt. Is is also excellent for removing any kind of wax like metallic, acrylic waxes, and solvent based waxes applied on floors or façades. ULTRA STRIPPER is indicated for the heavy stripping of floors before grind. It is also indicated to clean grout of tiles.

Deep cleaning of marble and granite without removing the natural sheen or damaging the surface has always been a problem. LEM-3 is the solution! Diluted in water in suggested ratio. LEM-3 acts vigorously against dirt and delicately with the material to be cleaned.Pleasantly perfumed and with the pH factor specifically studied for a deep cleaning of marble or any other stone material without damage, this is surely the detergent for the professional.

L&L is the ideal product for the daily maintenance of marble, granite and stones floors. It is excellent for "quick" maintenance of floors as its exclusive formula combines the cleaning and polishing actions. L&L enhances color and shine of the floors, protects them from finger prints and marks from daily foot traffic. It can be used with floor scrubbing machine for the daily maintenance of supermarkets, cinemas, shopping centers, airports floors etc

IDEA STONAGER is a product specifically studied to protect, intensify the color and give an antique look to stones marble, granite and artificial stones. Its typical application is on unpolished stones such as sand-blasted, bush-hammered, rough, flamed or honed ones. IDEA STONAGER protects against stains due to oils, greases, humidity and prevents formation of mildew.

Solvent based, water/oil repellent and deep colour enhancer specific for absorbent exotic granites and natural stones. Product indicated for all natural and textured internal/external, horizontal
and vertical sandblasted, bush-hammered, rough, flamed and honed materials. IDEA TROPICAL protects the surface from general water and oil-based substances, dirt and grime, grease and humidity and moisture while giving a deep rich, glossy appearance to the material. UV Resistant, breathable and resistant to rain, mould and atmospheric conditions.

Solvent based, nano-tech penetrating colour enhancer and anti-stain protective. indicated for the treatment of all composite, engineered stone, quartz/resin, gres, synthetic stones and marble/resin materials. Protects surfaces, countertops and vanity units from water and humidity-based stains, oils, greases and fats from penetrating surface without leaving a surface film. Prevents the formation of mold, mildew and protects stone against freeze-thaw and efflorescence. Highly recommended for the treatment of dull or faded surfaces to restore original colour. UV resistant. PFAS free - Formulated without added Pfas

Polishing powder specific for the polishing and gloss maintenance of granites and hard stones to obtain a high gloss finish. With every use, product hardens and protects surfaces from scratches and scuffs, while giving a high natural look gloss. Ideal for use in high traffic or commercial areas where general foot traffic will lower gloss and shine over time. 

Penetrating, water-based protective to be applied to the back and 4 sides of the tiles before installation to reduce surface staining from efflorescence, rising moisture, salts and yellowing. Indicated on all stones, marbles, granites, terracotta and porous materials. Treated materials remain breathable, reducing potential staining, salts and de colourations while allowing vapour to escape. Can be used with both traditional sand and cement fixing procedures or with standard cementitious powdered adhesives. Product does not alter surface bonding with bedding. The product does not contain any harmful substances to the environment. Exempt from VOC regulation. PFAS free - Formulated without added Pfas

Vinyl ester adhesive with strong bonding properties and excellent mechanical resistance indicated for visible and exposed seaming, laminations and gluing of marbles, granites, quartz and ceramics. Ultra advanced solid (knife grade) formulation with strong adhesion, the product is developed for versality on different surfaces where a clear translucent visible result is important. Highly indicated for 45° and 90° mitring and lamination. Highly recommended for white and light materials. Use 1-3% BPO paste

Specific cleaner indicated for dissolving and breaking down fresh and stubborn (hard, old,) excessive epoxy residues. Special slow drying formulation allows product to be used on used indoor, outdoor, hot damp and humid areas and on sun exposed surfaces. Gel formula. Safe and easy to use on vertical surfaces.

Bi-component, transparent, flexible epoxy glue with rapid hardening. For a secure bonding and gluing between different materials such as artificial and natural stone, bronze letters, steel, metal sink fasteners and fibreglass reinforcement rodding. Ideal for small applications. External and internal use. Hardening time 15 minutes.

ACESIL a single-component, acetic-polymerised silicone sealant, particularly suitable for smooth, non-absorbent surfaces and non-porous substrates such as glass and aluminium. ACESIL is suitable for glazing and prefabricated surfaces. It can be used in production, for assembly in the prefabrication phase or directly on site. ACESIL is used to form a flexible and waterproof seal between non-porous substrates such as glass, joint between sanitary ware and ceramic tiles, metals, aluminium. For particular uses (swimming pools) the sealing must necessarily be carried out with a primer. We recommend the use of the PRIMER suitable for this use. Restrictions: not suitable for building materials that exude oils, solvents or plasticizers. ACESIL should not be used for applications in completely enclosed spaces, as it requires atmospheric humidity to polymerise. It is not recommended to apply it in total immersion in water without special measures (primer) and on surfaces with which the acetic acid released during polymerization can react (e.g. cement, concrete, some metals, mortar, etc.).

Gelatinous cleaning product indicated for the removal of spray paint, marker and graffiti in general. Thanks to its high viscosity, non-drip formula, product is ideal for use on all vertical applications. Free of hazardous inflammable substances, product can be used in closed areas without the need of PPE materials. Slow evaporating solution allows product to be used on sun exposed surfaces while guaranteeing a prolonged effective surface clean dissolving paint residues without leaving residues or marks. Thanks to its specific formulation free from acids, alkaline, oxidants and reducers, product is compatible on all hard surfaces including glass, stone, non-painted metallic surfaces including aluminium e metal alloys for the removal of paint residues.

Protective, anti-graffiti treatment ideal for the protection of external cladding and facades in natural stone, marble, granite statues and surfaces from graffiti, spray paints and felt pens. STRIP VAPOR thanks to its special water based microcrystalline based formulation, protects the surface creating a micro invisible barrier (allowing material to breath) avoiding eventual paint build ups penetrating in material. STRIP VAPOR is a sacrificial treatment and will need to be reapplied every time graffiti is removed from surface, either by high pressured water or by a mechanical action with Ultrastripper.

Solvent based, colour enhancer and water/oil repellent specific for marble and granite slabs. Highly recommended for use in an industrial phase on polished slabs and surfaces to hide potential
defects, webbing, micro fissures and natural blemishes in material supplying a homogeneous colour and shine. Application protects materials from general surface stains and supplies anti-static properties. Product does not leave plastic effects or surface films. Breathable and resistant to UV, rain, mould and atmospheric conditions.

Product indicated for the crystallization of marbles, marble agglomerates, marble- cement, terrazzo and limestone floors to obtain a high durable surface gloss and restoring the beauty of the material. Periodic use of product increases surface hardness and resistance to potential absorption, foot traffic, scratches and marks. Suitable for use a periodic floor buffing and gloss maintenance to increase surface shine of material.

High performance, lithium silicate-based solution containing water repellent characteristics and anti-salt additives. Due to its low viscosity formulation, product penetrates deeply consolidating soft and fragile surfaces such as; calcareous stones, marbles, agglomerates, (cement based and Victorian tiles) and concrete surfaces creating a durable, stronger and resistant surface allowing material to be chemically polished with ease and consolidated. Non filming formulation and breathable, the solution bonds with the calcium carbonate content increasing the density creating a solid and protected surface.

Water based stain remover, formulated specifically to remove stubborn coloured based stains such as yellowing, browning and discolouration from all types from marble, granite and natural stone surfaces where traditional poultices are ineffective. Effective for the removal of tannin, urine and nicotine stains and for any remaining purple based haze or residue from the material following the use of B RUST REMOVER or MANGIA RUGGINE. Product does not damage the stone or surface.

Specific water-based solution for polishing and protecting bronze and steel objects from old patinas, tarnishing and oxidation, preserving the natural aspect. A2 ECO cleans and increases surface luster & gloss while avoiding future atmospheric damage. Ideal on bronze vases, statues and funerary art. Does not contain resins or solvents. Easy to use. Non yellowing.

Soap for stones containing natural ingredients of vegetal origin indicated for the final cleaning of floors after the polishing phase. The product cleans, removing surface residues while improving the gloss and temporarily protecting the surface from water and stains. Product will not leave any soap residues, streaks, or cause the surface to become slippery. When diluted product will not dull or damage the stone surface.

POLYBEL is a ready-to-use, concentrated pigment paste available in various colours, specifically designed for polyester-based adhesives such as MASTICE 2000. Thanks to its high-quality pigments, POLYBEL blends easily with adhesives, allowing you to achieve the desired shade and to match the colours of different types of stone and surfaces. It is light-resistant, ensuring the colour remains stable even after the adhesive has been catalysed.

Available colours: black, red, yellow, green, blue, brown, and white.

Versatile, two components, 1:1 epoxy adhesive with high bonding characteristics for marble, stone, granite, quartz and ceramic. Formulated with faster/quicker gel time when used in extreme conditions, speeding up gel times. Highly recommended for gluing mixed materials such as: ceramics-stones, cement-stones and stones-composite panels such as honeycomb. Can be used in external extreme conditions and on wet/damp surfaces.

Concentrated acidic-based solution formulated to create an antique or aged effect on marble, limestone, and other calcium-based natural stones. With the use of buffered acids, SAND PLUS chemically produces an “orange peel” texture on the surface, giving the material an aged, weathered appearance by modifying its structure. Highly recommended for stones such as; Perlino, Trani, Rosso Verona, Rosa Asiago, Travertine, and Biancone, as it enhances the natural colour and features.
A time saving alternative to mechanical or traditional surface treatments, SAND PLUS offers an easy way to achieve an antique finish without the need for particular tools and machinery. The product does not leave surface marks or shadows.

EPO BEL is a ready-to-use, concentrated pigment paste available in various colours, specifically designed for epoxy-based adhesives such as EPOX PREMIUM and EPOX 2000. Thanks to its high-quality pigments, EPO BEL blends easily with adhesives, allowing you to achieve the desired shade and to match the colours of different types of stone and surfaces. It is light-resistant, ensuring the colour remains stable even after the adhesive has been catalysed

TILELASTIC THIXO is a high-performance, two-component epoxy adhesive specifically formulated for the installation of stone, ceramic, and mosaic tiles. It offers excellent adhesion, low odour, and a smooth consistency that makes it easy to apply, even on vertical surfaces. TILELASTIC THIXO allows for precise tile positioning and bonding already after 24 hours. Its exceptional mechanical strength., moisture and chemical resistance make it particularly suitable for damp environments exposed to moisture such as bathrooms, showers, spas, and swimming pools